Applications:

  • The SLL-Vacuum series Autoclaves are ideal for critical applications and hard to sterilise items where assured sterilization is required.
  • Ideal for Pharma QC, QA, Micro, R&D, Production, Discard; Chemical Plants; Bio-Labs; Waste Treatment; Hospitals and Nursing Homes.

EQUITRON Advantages:

  • Unique single lever lock for lid with single hand opening.
  • User friendly programmable Controller with options of pre-vacuum, free-steaming and post vacuum, besides time & temperature, makes it fully automatic.
  • Programmable logic Controller ensures repeatability,high performance & accuracy.
  • Conformance to National & International Standards.
  • Easy lift and closing of the lid by assisted support.
  • Built in validation port enables user for self calibration checks.
  • User settable: No of -ve pulsing, No of +ve pulsing, Sterilisation temp. & time, Post vacuum & drying time
  • Low water detection.
  • Pressure interlock on door.
  • CE certified.

AUOTCLAVES SLV – Single Lever with Vacuum
Model Steam Source Working Chamber Size (Ø x D) / Capacity Carrier
(Ø x D)
Gross Dimension /
Weight
#7441SLVSG Inbuilt Steam generator 450 x 710mm /
 113 L
2 of 400 x 330 1430 x 1020 x 1430 mm / 240 kg
#7451SLVSG 550 x 760mm / 
180 L
2 of 500 x 350 1470 x 1140 x 1520 mm / 302 kg
#7441SLVDS Direct steam 450 x 710mm /
 113 L
2 of 400 x 330 1210 x 1020 x 1430 mm / 225 kg
#7451SLVDS 550 x 760mm / 
180 L
2 of 500 x 350 1250 x 1140 x 1530 mm / 285 kg


OPC:
Three additional temperature sensors (A,B,C) and an additional PLC print module are installed. This enables:

  • Display of four sensors - 3 temperature (Top/Centre/Bottom) plus one pressure.
  • Print to external DMP LX-300+ (part of standard supply) with date, time, set point, reading of controlling sensor, 3 temperature sensors & pressure.
  • Print of process status with each print.
  • Print of F0 value for Sensor A.
  • Print interval user settable 15 - 600 seconds.


For more details, please send a request on: sales@medicainstrument.com